{"id":125845,"date":"2026-10-23T05:08:33","date_gmt":"2026-10-23T03:08:33","guid":{"rendered":"https:\/\/www.wepaflyer.com\/guides\/build-your-own-kite\/"},"modified":"2026-11-21T10:33:34","modified_gmt":"2026-11-21T09:33:34","slug":"build-your-own-kite","status":"publish","type":"page","link":"https:\/\/www.wepaflyer.com\/en-gb\/guides\/build-your-own-kite\/","title":{"rendered":"Building your own kite: which materials do you need?"},"content":{"rendered":"<section class=\"l-section wpb_row height_medium\"><div class=\"l-section-h i-cf\"><div class=\"g-cols vc_row via_flex valign_top type_default stacking_default\"><div class=\"vc_col-sm-12 wpb_column vc_column_container\"><div class=\"vc_column-inner\"><div class=\"wpb_wrapper\"><div class=\"wpb_text_column\"><div class=\"wpb_wrapper\"><h1>Building your own kite: which materials do you need?<\/h1>\n<p><em>By <a href=\"https:\/\/www.wepaflyer.com\/en-gb\/about-us\/#pierre-paar\">Pierre Paar<\/a>, kite expert at Wepa Flyer, a family business since 1961<\/em><br \/>\n<em>Updated: 23 October 2026<\/em><\/p>\n<p><strong>Short answer:<\/strong> to build your own kite you need a sail of kite paper, Tyvek or ripstop fabric, two or more rods, a cross connector, end caps, bridle line and a kite line. Start with a 50 to 70 cm Eddy (diamond kite) with fibreglass rods of 1.5 to 4 mm. Bigger kites need thicker rods: the HQ Delta XL Sport 2M has 5 mm fibreglass, the HQ Delta XL Fireworks 4M 9.5 mm carbon and fibreglass.<\/p>\n<h2>What do you need to build your own kite?<\/h2>\n<p>You need a sail, rods with connectors, bridle line and a kite line. According to NASA, a kite should be as light as possible and still strong enough for strong wind. For a single-line Eddy, that means two rods, a V cross connector and four end caps; as tools, a pair of scissors, a tape measure and sticky tape or a sewing machine.<\/p>\n<h2>Which fabric should you use: paper, Tyvek or ripstop?<\/h2>\n<p>Choose kite paper for a light craft kite, Tyvek for a sturdy kite you colour in yourself, and ripstop fabric for a kite that has to last.<\/p>\n<p>DuPont&#8217;s Tyvek is made of fine high-density polyethylene (HDPE) fibres, bonded with heat and pressure and no binder. It looks like paper but is much harder to tear; you can colour on it and sew it on a household sewing machine. Tyvek SOFT is softer than Tyvek DRY and is less prone to sharp creases.<\/p>\n<p>Ripstop fabric has a woven-in grid of stronger threads, so a small tear doesn&#8217;t spread easily. The D in the name stands for denier: the mass in grams of 9,000 metres of yarn. It isn&#8217;t the fabric weight: Chikara 30D weighs 41 g\/m\u00b2, more than Chitex 40D (40 g\/m\u00b2).<\/p>\n<table class=\"lyter-guide-table\">\n<thead>\n<tr>\n<th>Fabric<\/th>\n<th>Material<\/th>\n<th>Weight<\/th>\n<th>Width<\/th>\n<th>Price<\/th>\n<th>Suitable for (according to the product page)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Glassine kite paper<\/td>\n<td>Paper<\/td>\n<td>30 g\/m\u00b2<\/td>\n<td>Sheet 100 x 70 cm<\/td>\n<td>See shop<\/td>\n<td>Making your own kites, crafts<\/td>\n<\/tr>\n<tr>\n<td>Tyvek SOFT<\/td>\n<td>Tyvek (HDPE)<\/td>\n<td>43 g\/m\u00b2<\/td>\n<td>152 cm<\/td>\n<td>See shop<\/td>\n<td>Kites<\/td>\n<\/tr>\n<tr>\n<td>Icarex 30D<\/td>\n<td>Ripstop polyester<\/td>\n<td>37 g\/m\u00b2<\/td>\n<td>140 cm<\/td>\n<td>See shop<\/td>\n<td>Top-end kites, extremely low stretch<\/td>\n<\/tr>\n<tr>\n<td>Chitex 40D<\/td>\n<td>Ripstop nylon<\/td>\n<td>40 g\/m\u00b2<\/td>\n<td>150 cm<\/td>\n<td>See shop<\/td>\n<td>Light models, trick kites, single-line kites<\/td>\n<\/tr>\n<tr>\n<td>Chikara 30D<\/td>\n<td>Ripstop nylon<\/td>\n<td>41 g\/m\u00b2<\/td>\n<td>150 cm<\/td>\n<td>See shop<\/td>\n<td>Foil kites, parafoils<\/td>\n<\/tr>\n<tr>\n<td>Chitex 70D<\/td>\n<td>Ripstop nylon<\/td>\n<td>60 g\/m\u00b2<\/td>\n<td>150 cm<\/td>\n<td>See shop<\/td>\n<td>Large models, stunt kites<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>We cut fabric and Tyvek from the roll by the full metre, so we can&#8217;t take them back; if you&#8217;re not sure, order a sample set first. The ripstop and Tyvek SOFT in the table come with a volume discount from 10 metres. You&#8217;ll find everything under <a href=\"https:\/\/www.wepaflyer.com\/en-gb\/products\/kite-accessories\/ripstop-fabric-kite-paper\/\">Ripstop fabric &amp; kite paper<\/a> and <a href=\"https:\/\/www.wepaflyer.com\/en-gb\/products\/kite-accessories\/ripstop-fabric-kite-paper\/tyvek\/\">Tyvek<\/a>.<\/p>\n<h2>Which rods should you choose: wood, fibreglass or carbon?<\/h2>\n<p>From 5 mm thick, wooden dowels are the cheapest; fibreglass is cheaper and more flexible than carbon. Wooden dowels are always solid rods; fibreglass and carbon also come as tubes, which are hollow and therefore lighter than a solid rod with the same outer diameter. For a tube, the outer diameter comes first and then the inner diameter: 6&#215;4 mm is 6 mm thick with a 1 mm wall.<\/p>\n<p>Per 200 cm rod at 6 mm, the wooden dowel is the cheapest, followed by the Fibreglass Basic solid rod, the Fibreglass Basic tube 6&#215;4 mm and the Carbon Basic tube 6&#215;4 mm. At 4 mm, fibreglass is cheaper than a wooden dowel.<\/p>\n<p>The rods in our <a href=\"https:\/\/www.wepaflyer.com\/en-gb\/products\/kite-accessories\/kite-rods-tubes\/\">Kite rods &amp; tubes<\/a> category are 200 cm long; from 10 items we halve them on request, though not in every diameter. Delivery to the UK costs \u00a315.99, and a parcel with a 200 cm rod is a long parcel that costs \u00a35.00 extra (see <a href=\"https:\/\/www.wepaflyer.com\/en-gb\/shipping-costs\/\">shipping costs<\/a>); please check the shipping costs page or ask us before you order long rods. The surcharge applies per parcel, so order fabric and parts at the same time. Wooden dowels are also sold in 100 cm lengths: you pay no surcharge for those, but we can&#8217;t take them back. On very small orders you pay a handling fee, which you see in the basket before you pay. <a href=\"https:\/\/www.wepaflyer.com\/en-gb\/collect-your-order\/\">Collection in Zevenaar (Netherlands)<\/a> is only available for EU orders. Order before 15.00 on a working day (items in stock) and we ship the same day.<\/p>\n<h2>Which rod thickness suits which size of kite?<\/h2>\n<p>The bigger the kite, the thicker the frame: from 2 and 1.5 mm on a 50 cm Eddy to 9.5 mm on a 4-metre delta. Use the frame of a similar kite as your starting point; according to the product pages, all five fly in 2 to 5 Beaufort.<\/p>\n<table class=\"lyter-guide-table\">\n<thead>\n<tr>\n<th>Kite from the shop<\/th>\n<th>Type and size<\/th>\n<th>Frame<\/th>\n<th>Line supplied<\/th>\n<th>Price<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>HQ Eco Eddy 50 Spectrum<\/td>\n<td>Eddy, 50 x 45 cm<\/td>\n<td>Fibreglass 2 + 1.5 mm<\/td>\n<td>25 m, 10 daN<\/td>\n<td>See shop<\/td>\n<\/tr>\n<tr>\n<td>HQ Eco Eddy 70 Rainbow<\/td>\n<td>Eddy, 70 x 58 cm<\/td>\n<td>Fibreglass 4 + 2 mm<\/td>\n<td>25 m, 17 daN<\/td>\n<td>See shop<\/td>\n<\/tr>\n<tr>\n<td>HQ Delta Rainbow 140<\/td>\n<td>Delta, 140 x 75 cm<\/td>\n<td>Fibreglass 4 mm<\/td>\n<td>40 m, 17 kg<\/td>\n<td>See shop<\/td>\n<\/tr>\n<tr>\n<td>HQ Delta XL Sport 2M<\/td>\n<td>Delta, 200 x 100 cm<\/td>\n<td>Fibreglass 5 mm<\/td>\n<td>60 m, 45 kg<\/td>\n<td>See shop<\/td>\n<\/tr>\n<tr>\n<td>HQ Delta XL Fireworks 4M<\/td>\n<td>Delta, 410 x 195 cm<\/td>\n<td>Carbon + fibreglass 9.5 mm<\/td>\n<td>Kite Only (no line); DacronLine 60\u2013100 daN recommended<\/td>\n<td>See shop<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Which parts do you need?<\/h2>\n<p>Choose each part to match the diameter of your rod; you only need connectors for frames that come apart or long frames:<\/p>\n<ul>\n<li><strong>V cross connector:<\/strong> 11 sizes from 1.5 to 12 mm, plus the low-cost white Wepa cross connector in LDPE (6\/6 mm).<\/li>\n<li><strong>End caps:<\/strong> soft PVC caps from 2 to 22 mm. The size is the inner diameter, so the same as your rod thickness.<\/li>\n<li><strong>Aluminium connectors (ferrules):<\/strong> sleeves from 1.5 to 12 mm inner diameter to join two fibreglass or carbon rods.<\/li>\n<li><strong>Ring and swivel:<\/strong> a 14 mm aluminium ring or split ring for attaching the kite line to the bridle, and a swivel (100 daN) to stop the line twisting.<\/li>\n<li><strong>DacronBand:<\/strong> non-adhesive polyester tape (170 g\/m\u00b2, 2 to 10 cm wide) to reinforce edges, holes and rod sleeves.<\/li>\n<\/ul>\n<p>You&#8217;ll find cross connectors and end caps under <a href=\"https:\/\/www.wepaflyer.com\/en-gb\/products\/kite-accessories\/plastic-kite-parts\/\">Plastic kite parts<\/a>, and ferrules, rings and swivels under <a href=\"https:\/\/www.wepaflyer.com\/en-gb\/products\/kite-accessories\/metal-kite-parts\/\">Metal kite parts<\/a>.<\/p>\n<h2>How do you make a bridle?<\/h2>\n<p>The bridle is the piece of line between the kite and the kite line. The point where the kite line is attached sets the angle at which the kite sits in the wind and, according to NASA, has a big influence on how fast and how high it climbs.<\/p>\n<ol>\n<li><strong>Choose low-stretch bridle line<\/strong> with a Dyneema core, such as STex DY-Heart (49 to 130 daN, sold by the metre): knots and loops hardly slip in it. Make it at least as strong as your kite line, because all the pull runs through the bridle.<\/li>\n<li><strong>Tie the ends<\/strong> to the spine, at the cross connector and at the bottom, leaving enough length for a triangle.<\/li>\n<li><strong>Tie a ring onto the bridle<\/strong> with a lark&#8217;s head knot that you can slide, and attach the kite line to it.<\/li>\n<li><strong>Find the towing point:<\/strong> slide the knot in small steps and relaunch the kite after each step, until it climbs steadily and holds its position. Note that setting for next time.<\/li>\n<\/ol>\n<p>If your bridle has more legs, make the left and right legs exactly the same length.<\/p>\n<h2>Which kite line should you use for a home-made kite?<\/h2>\n<p>Use the line of a similar kite from the table: 10 daN for a 50 cm Eddy, 17 daN (or 17 kg) for an Eddy or delta up to 140 cm and 45 kg for a 2-metre delta (1 daN is 1.02 kg). For a small kite there&#8217;s the A-Reel with 40 metres of 15 or 26 kg line, and for big single-line kites HI-DacronLine from 20 to 120 daN in <a href=\"https:\/\/www.wepaflyer.com\/en-gb\/products\/kite-accessories\/kite-line-on-spools\/\">Kite line on spools<\/a>. More on this in the guide <a href=\"https:\/\/www.wepaflyer.com\/en-gb\/guides\/choosing-kite-line\/\">Choosing kite line<\/a>.<\/p>\n<h2>How do you repair a broken rod or a tear?<\/h2>\n<p>Replace a broken rod with a rod of the same material and diameter, and cover a tear with the same material.<\/p>\n<ul>\n<li><strong>Rod:<\/strong> measure the thickness with a calliper and, for a tube, the inner diameter too. As an emergency repair, saw the break off straight and slide an aluminium connector with the same inner diameter as your rod thickness over both parts.<\/li>\n<li><strong>Ripstop:<\/strong> sew a patch of the same fabric over the tear.<\/li>\n<li><strong>Tyvek:<\/strong> stick sticky tape or a patch of self-adhesive Tyvek FASSON over it.<\/li>\n<li><strong>Kite paper:<\/strong> glue a piece of kite paper over it.<\/li>\n<\/ul>\n<p>If you saw fibreglass or carbon, wear gloves and a dust mask and sand the cut edge smooth: glass fibre irritates the skin, eyes and airways.<\/p>\n<h2>Where can you safely test your home-made kite?<\/h2>\n<p>Test it in an open field or on a beach, far from power lines, railway overhead lines, roads, houses and trees. NASA warns that the electricity can kill you if your kite touches a power line. If it does get caught in a line, let go of the line and don&#8217;t try to get it back. For a power line, call 105 (in Northern Ireland, NIE Networks on 03457 643 643); for a railway overhead line and in any immediate danger, call 999. Don&#8217;t fly in a thunderstorm: the Met Office advises keeping a safe distance from trees, poles and metal objects, and warns that umbrellas can conduct or attract lightning, so pack up and go indoors. For the first flight, choose 2 to 5 Beaufort. See also <a href=\"https:\/\/www.wepaflyer.com\/en-gb\/guides\/which-kite-for-which-wind\/\">Which kite for which wind?<\/a> and <a href=\"https:\/\/www.wepaflyer.com\/en-gb\/guides\/where-to-fly-a-kite\/\">Where can you fly a kite?<\/a><\/p>\n<h2>Frequently asked questions<\/h2>\n<p><strong>What&#8217;s the easiest kite to build yourself?<\/strong><br \/>\nAn Eddy or diamond: two rods, one cross connector and a two-point bridle. Even simpler is a kite-making kit such as the Tyvek DODO. Everything is included except scissors and sticky tape. See the guide <a href=\"https:\/\/www.wepaflyer.com\/en-gb\/guides\/kite-making-kits-schools-workshops\/\">Kite-making kits for schools, workshops and kids&#8217; parties<\/a>.<\/p>\n<p><strong>Is building your own kite cheaper than buying one?<\/strong><br \/>\nNot for a small Eddy. For a 70 x 58 cm Eddy you need 1 metre of Tyvek SOFT, a 4 mm fibreglass rod, a 4\/4 mm V cross connector, four end caps, 2 metres of bridle line and an A-Reel with 40 metres of 26 kg line. Together, those materials cost more than the ready-made HQ Eco Eddy 70 Rainbow, and the 200 cm rod makes your parcel a long parcel, which costs \u00a35.00 extra to ship to the UK.<\/p>\n<p><strong>Can I return kite fabric, Tyvek or rods?<\/strong><br \/>\nNot fabric and Tyvek from the roll or 100 cm wooden dowels: we cut those to size. You can send other products back within 14 days of receipt, at your own cost. See the <a href=\"https:\/\/www.wepaflyer.com\/en-gb\/terms-and-conditions\/\">terms and conditions<\/a>.<\/p>\n<p><strong>Can I build a stunt kite myself too?<\/strong><br \/>\nYes, with ripstop such as Chitex 70D, fibreglass or carbon rods and DacronBand for the sleeves the rods run through. Use the frame of a similar stunt kite as your guide: the HQ Eco Orion Rainbow (140 x 74 cm) has 4 mm fibreglass. More in the guide <a href=\"https:\/\/www.wepaflyer.com\/en-gb\/guides\/buying-a-stunt-kite\/\">Buying a stunt kite<\/a>.<\/p>\n<h2>Sources<\/h2>\n<ul>\n<li>NASA Glenn Research Center, <a href=\"https:\/\/www.grc.nasa.gov\/www\/k-12\/airplane\/kite1.html\">Kites<\/a> (as light as possible, strong enough for strong wind)<\/li>\n<li>NASA Glenn Research Center, <a href=\"https:\/\/www.grc.nasa.gov\/www\/k-12\/airplane\/kitetrim.html\">Kite Torque Equation<\/a> (the bridle point sets the flying angle and the climb)<\/li>\n<li>NASA Glenn Research Center, <a href=\"https:\/\/www.grc.nasa.gov\/www\/k-12\/airplane\/kitesafe.html\">Kite Safety<\/a> (open ground, no power lines)<\/li>\n<li>DuPont, <a href=\"https:\/\/www.dupont.com\/packaging-materials-and-solutions\/tyvek-industrial-packaging.html\">Tyvek for Industrial Packaging<\/a> (HDPE fibres, heat and pressure, no binder)<\/li>\n<li>Wikipedia, <a href=\"https:\/\/nl.wikipedia.org\/wiki\/Denier_%28eenheid%29\">Denier (unit)<\/a> (grams per 9,000 metres of yarn; Dutch-language article)<\/li>\n<li>Wikipedia, <a href=\"https:\/\/en.wikipedia.org\/wiki\/Ripstop\">Ripstop<\/a> (reinforcing threads stop small tears)<\/li>\n<li>Wikipedia, <a href=\"https:\/\/en.wikipedia.org\/wiki\/Fiberglass\">Fibreglass<\/a> (cheaper and more flexible than carbon; irritates the skin, eyes and airways)<\/li>\n<li>Met Office, <a href=\"https:\/\/weather.metoffice.gov.uk\/warnings-and-advice\/seasonal-advice\/health-wellbeing\/stay-safe-in-thunder-and-lightning\">Stay safe in thunder and lightning<\/a> (thunderstorm advice)<\/li>\n<li>NESO, <a href=\"https:\/\/www.neso.energy\/energy-outages\">Energy outages<\/a> (call 105, free, to report damage to power lines in Great Britain; Northern Ireland: NIE Networks, 03457 643 643)<\/li>\n<li>Network Rail, <a href=\"https:\/\/www.networkrailmediacentre.co.uk\/news\/kite-flyers-reminded-of-railway-risks\">Overhead electric wires warning after kite flyers risk their lives<\/a> (25,000 volts, never switched off)<\/li>\n<\/ul>\n<style>.lyter-guide-table{width:100%;border-collapse:collapse;margin:1rem 0;font-size:.95em}.lyter-guide-table th,.lyter-guide-table td{border:1px solid #e5e5e5;padding:.5rem;text-align:left;vertical-align:top}.lyter-guide-table th{background:#f5f6f8}mark.lyter-check{background:#fff3b0}<\/style>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/section>\n","protected":false},"excerpt":{"rendered":"Building your own kite: which materials do you need? By Pierre Paar, kite expert at Wepa Flyer, a family business since 1961 Updated: 23 October 2026 Short answer: to build your own kite you need a sail of kite paper, Tyvek or ripstop fabric, two or more rods, a cross connector, end caps, bridle line...","protected":false},"author":2,"featured_media":0,"parent":125831,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"_yoast_wpseo_title":"Building your own kite: fabric, rods and bridle | Wepa Flyer","_yoast_wpseo_metadesc":"To build a kite, choose paper, Tyvek or ripstop, rods from 1.5 to 9.5 mm, a cross connector, bridle and line. With fabric and frame tables.","footnotes":""},"class_list":["post-125845","page","type-page","status-publish","hentry"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.wepaflyer.com\/en-gb\/wp-json\/wp\/v2\/pages\/125845","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.wepaflyer.com\/en-gb\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.wepaflyer.com\/en-gb\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.wepaflyer.com\/en-gb\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.wepaflyer.com\/en-gb\/wp-json\/wp\/v2\/comments?post=125845"}],"version-history":[{"count":1,"href":"https:\/\/www.wepaflyer.com\/en-gb\/wp-json\/wp\/v2\/pages\/125845\/revisions"}],"predecessor-version":[{"id":126259,"href":"https:\/\/www.wepaflyer.com\/en-gb\/wp-json\/wp\/v2\/pages\/125845\/revisions\/126259"}],"up":[{"embeddable":true,"href":"https:\/\/www.wepaflyer.com\/en-gb\/wp-json\/wp\/v2\/pages\/125831"}],"wp:attachment":[{"href":"https:\/\/www.wepaflyer.com\/en-gb\/wp-json\/wp\/v2\/media?parent=125845"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}